Glexo Hail Kit - 5 tabs with 2 types of cold glue
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

Glexo Hail Kit - 5 tabs with 2 types of cold glue

Available: In Stock
$485.00

The Glexo Hail Kit has been specially designed to help technicians with hail damages. Repairing hail is a difficult job where saving time is very important. Since the Glexo adhesive can overheat during continuous operation, affecting its performance, the Glexo Hail system includes redundant tabs to enable continuous working.

All tabs are equipped with Glexo's patented proprietary locking system with O-ring for quick and secure installation. Can be used and are suitable for use with arbitrary slide hammer. The recommended weight of the slide hammer is 1.2kg / 2.6lb.

The technique of work includes the following stages:
1. Prepare work surface. The working surface must be free of dirt and grease. For guaranteed high adhesion it is recommended to use the Glexo Surface Preparation System (SPS).
2. Install the Glexo Hail tab with applied adhesive on the slide hammer until it stops.
3. Form a small cone-shaped bead of glue on the tab.
4. Using a twisting motion, glue the tab to the center of the damage. Use a slide hammer as a lever.
5. Remove damage with a sharp hammer blow. Repeat if necessary.

The Glexo Hail kit includes two small 25mm /0,98” tabs, two 30mm /1,18” tabs and a crease tab for oblong damage. The kit contains two types of adhesive composition for different temperature conditions.

After work, the tabs are stored directly with the applied adhesive in the wooden box in which the system is supplied. To prevent sticking, anti-adhesive films are included in the kit, which must be wrapped around the tabs with the applied composition.

The Glexo Hail kit comes with a 1 year warranty.

    The Glexo Hail Kit has been specially designed to help technicians with hail damages. Repairing hail is a difficult job where saving time is very important. Since the Glexo adhesive can overheat during continuous operation, affecting its performance, the Glexo Hail system includes redundant tabs to enable continuous working.

    All tabs are equipped with Glexo's patented proprietary locking system with O-ring for quick and secure installation. Can be used and are suitable for use with arbitrary slide hammer. The recommended weight of the slide hammer is 1.2kg / 2.6lb.

    The technique of work includes the following stages:
    1. Prepare work surface. The working surface must be free of dirt and grease. For guaranteed high adhesion it is recommended to use the Glexo Surface Preparation System (SPS).
    2. Install the Glexo Hail tab with applied adhesive on the slide hammer until it stops.
    3. Form a small cone-shaped bead of glue on the tab.
    4. Using a twisting motion, glue the tab to the center of the damage. Use a slide hammer as a lever.
    5. Remove damage with a sharp hammer blow. Repeat if necessary.

    The Glexo Hail kit includes two small 25mm /0,98” tabs, two 30mm /1,18” tabs and a crease tab for oblong damage. The kit contains two types of adhesive composition for different temperature conditions.

    After work, the tabs are stored directly with the applied adhesive in the wooden box in which the system is supplied. To prevent sticking, anti-adhesive films are included in the kit, which must be wrapped around the tabs with the applied composition.

    The Glexo Hail kit comes with a 1 year warranty.

      PROCESSING YOUR ORDER

      Online orders will be delivered within approximately 1-3 working days after being placed. Please allow for additional delivery time to regional areas and areas outside Metro Areas.

      Please note that orders may be delayed in sale/holiday periods or due to stock availability.

      If any item(s) in your order are out of stock at the time your order is processed, we will notify you via email or phone.

      TRACKING

      Shipping company we use - TNT Couriers via Road Express.

      All deliveries require a signature. In which case you may elect to have the parcel safe dropped at your requested delivery address.

      All tracking information is sent out via email from the following email address: contact@smartpdrtools.com.au or phone the shop on 📞 02 9607 7609.

      If you are unable to find your tracking email please search your spam folder/s as sometimes it may be redirected there.

      INTERNATIONAL ORDERS

      Shipping company we use - DHL your delivery will require a signature.

      Please note: Country taxes and duties must be paid by you the customer.

      Delivery times will vary with international orders and can't be guaranteed or estimated.

      PROBLEMS WITH YOUR ORDER?

      We want you to have the best online shopping experience, so if you have any queries or concerns with your order, please contact: contact@smartpdrtools.com.au or phone the shop on 📞 02 9607 7609.

      RETURN POLICY

      Return any new, unused item within 30 days for a refund of the purchase price.
      If you have a manufacturing problem or an issue with a tool; we will do our very best to repaired or if required replace the item, to our suppliers specifications. Any questions please contact us at contact@smartpdrtools.com.au or phone the shop on 📞 02 9607 7609.